Swarovski 9030 CG 610 (A+B) Two Component Epoxy Resin Glue, 750ML Box

CG 610-240 (A+B)
The CG 610-240 two-component epoxy resin glue was specially developed for gluing Swarovski crystals of very small sizes, starting with PP 0. Depending on the area of application the adhesive can be used for crystals up to the size of PP 14.

Key Features:

Suitable for gluing very small crystals (starting with size PP 0)

Low viscosity allows an easier dosing of small glue quantities

Cost saving due to long pot life (140 min.)

Technical Data:
Mixing ratio (A : B) - 2 : 1 (resin : hardener) by weight
Pot life at room temperature (23°C/73.4°F) – quantity applied: 1 g - 140 min.
Complete curing time at room temperature (23°C/73.4°F) - 72 h our
Complete curing time in oven (40°C/104°F) - 12 hour
Complete curing time in oven (70°C/158°F) - 4 h our
Complete curing time in oven (100°C/212°F) - 1.5 hour
Handling time at room temperature (23°C/73.4°F) - 16 hour
Elasticity (break extension at 23°C/73.4°F) - 46.5%
Viscosity, mixed (23°C/73.4°F) - 1.750 +/- 250 mPa*s

When using glue of the 750 g box, resin and hardener have to be mixed. First, weigh the two glue components at a ratio of 2 : 1 (resin : hardener). It is very important to keep an exact mixing ratio of the two components to achieve maximum adhesion. Mix then the two components well for at least one minute. Only a fully homogenous mixture leads to the desired results.

數量：